It's New! It's Awesome! It's Cool! It's Genius! It Saves Money! |
Did You Know? |
A tool battery right off the charger will measure about 3 volts higher than its rating. For example, a 12 volt battery will be about 15 volts out of the charger. After a minute or two of operation the battery will drop down to 12 volts and your tool has lost that initial burst of power. Tools are designed for this extra voltage. |
| |
| Now, with Rambo Battery™ and Porta-Pak™ |
| You can have that fully charged power through the entire life of the charge. If you have a saw that "won't cut it" or a "drill that bogs down" or if you just like more power - this is the only way you can get it! |
|
|
|
|
|
|
• |
You can run all your battery operated tools from 1 Rambo Battery™ - Any voltage, Any Brand. I know you are saying, "Impossible!", but it is true. It is done by creating a battery adapter from your Dewalt, Craftsman, Makita, etc. dead batteries and then simply plugging the Rambo Battery™ into the adapter for the tool you want to use.  |
| |
|
 |
• |
You can run your NiCad only tools on More Powerful NiMH. With a Rambo Battery™ you choose to run cheap NiCad cells like in a Skil or Drill Master or more powerful NiMH cells like in a Makita or Milwaukee. You decide how much power you need and how much you want to spend.  |
| |
|
 |
• |
You like your new Li-ion tool, but not enough to buy a new $100 battery for it! Now you can run your Li-ion tool on a Rambo Battery™ and it can run as strong or even stronger.  |
| |
|
 |
• |
Make your cordless tool smaller! For working in cabinets, etc. By using a low profile battery adapter you can remove 90% of the battery size on any Dewalt, Craftsman, Ryobi, Milwaukee, Makita, Firestorm, Bosch, Hitachi, Skil, Porter Cable, Coleman, or Black & Decker tool.  |
| |
|
 |
• |
Up to 12 times the run time of your tools. Suppose you have a cheap 12 volt cordless drill with the typical NiCad 1200mah (1.2 amp hour) battery. Configure a Rambo Battery™ for your drill with NiMH cells at 3600mah (3.6 amp hour) and you will have 3 times the run time. Configure the Rambo Battery™ with (4) 12 volt batteries in parallel around the bandoleer and you will have 12 times the original run time. AMAZING! |
|
Kits and Plans Are Available NOW! Click Above
Let Us Know If You Only Want Fully Assembled Items
By Entering Your Name and Email Address Here >>> |
|
|
Are You Fed Up With Buying Expensive Batteries For Each Tool?
NOW! You Don't Have To
Our Brand New Rambo Battery™ Is Amazing Because:
-
Run all your tools from one Rambo Battery™ - NiCad, NiMH, and even Li-ion
-
It can output any voltage to work with any power tool
-
It can output multiple voltages to work with many power tools
-
It will run any and all brands of cordless power tools
-
You can run more powerful NiMH batteries on NiCD only tools
-
Your tool will be lighter because the cell cluster is not in the tool
-
You can easily replace 1 bad cell in the Rambo Battery™ or Porta-Pak™
-
More friendly to the environment because you dump fewer batteries
-
Up to (4) 12 volt batteries on one Rambo Battery™ bandoleer
-
Designed and Built by Unique Dynamics, Inc. - Patent Pending
|
|
Who Uses The Rambo Battery™ & Porta-Pak™ Power Station™?
-
Professionals - when working on upper levels, one Rambo Battery™ with multiple batteries installed eliminate the need to drag several Craftsman, Ryobi, or Milwaukee loose batteries up with you. You can even wear 2 Rambo Batteries™ with 2 holsters, hombre style, for quick access to 2 different tools - for example, 2 drills, 1 for drilling and one for driving screws.
-
Home owners or hobbyist - You have some old tools you like and the batteries are dead and you don't want to spend hundreds for batteries because you only need the tools occasionally. 1 Rambo Battery™ or Porta-Pak™ can power all those tools no matter what voltage they are or what company like Dewalt, Bosch, Hitachi, Skil, Fein, or Craftsman made them. Now you can use all your cordless drills, saws, and tools again.
-
Landscapers - Your battery powered Black and Decker, Milwaukee, Ryobi, Craftsman and Bosch saws, trimmers, and other cordless tools draw a lot of current and wear down your batteries quickly and that is expensive. You can configure 1 Rambo Battery™ to use super high power cells that will power all your cordless tools - like never before.
-
Arts and crafts - hang the Rambo Battery™ at your work bench or setup a Porta-Pak™. Your tool will be lighter and will run longer and you will have less fatigue at the end of the day. And costs much less in the long run.
-
Retired fixed income - The cost for 2 or more batteries is outrageous. 1 Rambo Battery™ will power all your cordless drills, saws, screwdrivers and other cordless tools and if a cell goes bad, you can replace it yourself easily and inexpensively. Original tool batteries from Dewalt, Black and Decker, Ryobi, Makita, Milwaukee, Fein, Snap-on, Hitachi, Kawasaki, and Porter Cable are usually disposed of when a cell goes bad.
-
Specialty Tool Users - You know if you have a specialty Tool because replacement batteries can be over $300. Now a Rambo Battery™ can be configured for 24 volts or 36 volts to power these tools. The cost will be less and you can replace a bad cell easily, so the Rambo Battery™ will give much longer service at a much lower cost. Skill Info - click
|
|
| |
Details About The Rambo Battery™
The Rambo Battery™ is sold as a kit. You assemble it yourself using our super easy to follow online guide. The Rambo Battery™ Build It!™ Guide is designed for beginners with simple instructions and large pictures and with videos showing the very simple things beginners want to know, such as:
- How to strip a wire
- How to solder a wire correctly
- Basically, all the things needed for a beginner to be able to build the Rambo Battery™
- Here is a sample - click for cable stripping video - 6mb
Professionals and skilled people can bypass the beginner videos.
A skilled tradesman can build the Rambo Battery™ in as little as 40 minutes. Others should expect about 1 to 2 hours. After building a Rambo Battery™ you will be able to replace a cell in about 3 minutes - try that on any other tool battery!
|
How Does The Rambo Battery™ Connect To The Tool?
The Rambo Battery™ and the Porta-Pak™ Power Station™ are external cell clusters that replace the cell clusters in your original tool batteries by Craftsman, Dewalt, Ryobi, Milwaukee, Skil, Makita, Porter Cable, Drill Master, Bosch, Hitachi, Kawasaki, Black and Decker, and all other cordless drill tool batteries.. You will learn how to make one of your old Dewalt, Craftsman, Ryobi, Makita, or Milwaukee post or slide type tool batteries into an adapter which is then attached to your tool as it always has been. You can make an adapter for each type and brand of tool you have, such as Firestorm, Coleman, Skil, Craftsman, Dewalt, Makita, Craftsman, or Skil. You connect the Rambo Battery™ to the battery adapter for the tool you want to use.
|
|
|